36V/48V Motor Speed Dual-mode Controller Brushless Motor Controller E-bike

This item is a brushless motor controller, it can provide steady speed and sensitive control of braking and direction changes.The wires and interfaces are durable, and ensure low malfunction of long time use.

The interfaces have instruction labels on them for your easy installation.Suitable for electric bicycles, scooter, etc.

How to use?

Turn off the power before wiring.
1. Connect the learning switch.
2. Connect the motor wire(phase A, phase B, phase C). Then connect the hall plug.
3. Connect the power and the twist grip plug.
4. Twist the grip plug. If the motor rotate reversely, cut off the learning switch, then connect the learning switch again. If the motor doesn’t rotate, check the wiring. If the motor forward rotation, go to step 5.
5. Keep the motor working at least 1 minute, cut off the learning switch.
6. Twist the grip plug. If the motor works normal, connect other wire. If not, adjust the twist grip wire, until the motor works normally.

Note:
1) It only fit for Motor with sensors.This is a simple edition.
2) Please allow 1-3mm differs due to manual measurement.
3) Due to the different display and different light, the picture may not reflect the actual color of the item.

Specification:

Material: Aluminium alloy

Rated Working Voltage: 36/48V

Rated Power: 350W

Current: 13A

Low Voltage Protection: 31/42V

Suitable  Motor Phrase Angle: 60 / 120 degree

Suitable for: electric bicycle, scooter, etc

Size: Approx. 9 x 5.3 x 3cm / 3.5 x 2 x 1.18inch

Weight:. 204g

Package List:

1 x Brushless Controller